Analog global summary screen – WattMaster WCC II User Manual

Page 93

Section 3: Screen Descriptions

WCC II Operator’s Guide

Operator Interfaces

3-61

ANALOG

Speciﬁ es the summary type to be displayed. Because this is a
“choice” ﬁ eld, the list of available choices will be displayed at the
bottom of the screen:

CHOICES:

To make your selection, press the

once for each

choice until the desired summary type has been selected and then
press

. (If you select a summary type that is different than

that currently being displayed, the screen will be rewritten with the
appropriate screen information.)

To view or edit a speciﬁ c analog global, use the arrow keys to
position the cursor (shown as “>” along the left-hand side of the
screen) to the desired point and press

. The Analog Global

Screen for the speciﬁ ed point will now appear.

Description

The description message which was entered on the Analog Global
Screen is displayed here to aid you in identifying the different
analog globals within the screen.

Value

The present value of the global analog is displayed on the screen
at this location.

Alarm Limits

Alarm Time

The alarm limits for the global analog are shown here along with
the time that the alarm occurred.

The alarms for global analogs do not appear on the Alarm Summary
Screen. However, if a global alarm is active, the alarm class will
appear on the Main Menu after the “Active alarms in classes:”
statement.

Acknowledge Alarms

The global analog alarms are acknowledged from the Global
Analog Summary Screen by moving the cursor to the active alarm
and pressing

. If the global analog value is within the

alarm limits, the alarm message will be cleared from the screen.
It can take up to 30 seconds before the alarm is cleared from the
screen.

ANALOG GLOBAL SUMMARY SCREEN

-----------------------------------------------------------------------------------------