WattMaster WCC II - Manual (Page 234)

Section 5: Installation Guide
WCC II Operator’s Guide
Operator Interfaces 5-32
SAT II-B - General Information
The STATUS 1 light on the
front of the SAT II-B controller should fl icker. If
it is off or on solid, the SAT II-B is not operating
properly.
The function of STATUS lights 2 and 3 have not
been defi ned at this time.
The RECV light fl ickers when the SAT II-A is
receiving information from the TUC’s.
The XMIT light fl ickers when the SAT II-B sends
information to the TUC’s.
The POWER light should be on continuously when
there is power to the SAT II-B.
•
•
•
•
•