WattMaster WCC II User Manual
Page 86
Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces
3-54
Demand From: GA0
If you would like to average the kwh of the building using the
sliding window feature of the analog globals, enter the number of
the analog global which has the building kwh. If you want to read
the kwh from the satellite controller directly, enter GA0.
Energy Consumption History
The system will automatically show what the consumption (kwh)
and demand (kwh) is for today, yesterday, this month, and last
month. The system will also show the time and date when the peak
occurred.
You may select either Consumption or Demand by placing the
cursor in this fi eld, pressing the
until the desired
word appears and then pressing
.
You may also choose to display the past 60 days of data or the past
12 months by pressing the
until the desired choice
appears and then pressing
.
You may move the cursor down into the consumption or demand
table and manually enter kwh or kwh demand for certain days or
months.
Energy Consumption Printout
The energy consumption data for each screen will automatically be
printed once an hour if a printer is connected to the ECC/WCC II. If
you do not want this print-out, go to the Utility-System Parameter
II Screen to deactivate the print-out feature.
---------------------------------------------
Utility - System Parameter II Screen
Disable Energy Consumption print-out:
---------------------------------------------