Analog output summary screen analog outputs – WattMaster WCC II User Manual
Page 54
Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces
3-22
An analog output is a proportional DC voltage supplied by the
SAT II with a maximum range of 0-15 VDC. The analog outputs
are proportional only, not proportional plus integral (PI), or
proportional plus integral plus derivative (PID).
Analog Out
Specifi ed the summary type to be displayed. Because this is a
“choice” fi eld, the list of available choices will be displayed at the
bottom of the screen.
CHOICES:
Make your selection by pressing the
until the desired
summary type has been selected, and then press
. If you
select a summary type that is different than that currently being
displayed, the screen will be rewritten with the new information.
Satellite ______
Specifi es the number of the satellite which you are currently
communicating with. If you would like to view the analog output
summary data for a different satellite, use the arrow keys to
move the cursor to this fi eld, enter the desired number, and press
.
To view or edit a specifi c analog output, use the arrow keys to move
the cursor (shown as “>” along the left hand side of the screen) to
the desired point, and press
. The Analog Output Screen
for the specifi ed point will appear.
Time and Date
The current time and date will automatically be displayed here.
COMMENTS
The description message which is entered on the individual Analog
Output Screens will automatically appear here to help you identify
the different analog outputs within the system.
STATUS
The amount of DC voltage supplied by the analog output is shown
here to help you monitor the status of the analog output.
MODE
An “alt” message may be displayed in this column to inform you
that analog output is in its alternate mode. When the status of the
binary input which has been entered on the analog output screen to
select the alternate mode is “ON,” the alternate control limits are
used, and the “alt” message is shown here.
-----------------------------------------------------------------------------------------
Analog
Out
Satellite
1
Time
Date
17:17
7/07
--------Analog Outputs--------
COMMENTS STATUS MODE
CURRENT INPUT INPUT RANGE OUTPUT RANGE
----------------------------------------------------------------------------
P1: CHW VALVE
7.1 V
54.7 Deg F
50.0 - 60.0 0.0 - 15.0 V
P2:
0.0 V
0 - 0
0 -
0 V
P3:
0.0 V
0 - 0
0 - 0 V
P4:
0.0 V
0 - 0
0 - 0 V
P5:
0.0 V
0 - 0
0 - 0 V
P6:
0.0 V
0 - 0
0 - 0 V
P7:
0.0 V
0 - 0
0 - 0 V
P8:
0.0 V
0 - 0
0 - 0 V
HOME for menu
--------------------------------------------------------------------------------
ANALOG OUTPUT SUMMARY SCREEN
ANALOG OUTPUTS