WattMaster WCC II - Manual (Page 195)

Section 4: Remote Communications
WCC II Operator’s Guide
Operator Interfaces 4-7
Logical Address Search
The Logical Address Search Screen has two fi les on the disk in
the on-site computer named “ SE_LOGIC.DAT” and “ SE_GLOB.
DAT.” Before the “Logical Address Search” will operate at the
remote computer, these fi les must be transferred to the remote
computer by fi lling out the following WCC/SCC File Management
Screens:
--------------------------------------------------------------------------------
File name: SE_LOGIC.DAT
New fi le name:
Direction: WCC->SCC
Action: Copy
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
File name: SE_GLOB.DAT
New fi le name:
Direction: WCC->SCC
Action: Copy
--------------------------------------------------------------------------------
Notes:
SATELLITE SAVE/RESTORE
PROGRAM
The “Satellite Save-Restore” program is used to save satellite data
to the disk in the computer or restore satellite data from the disk to
the satellite controllers. When using the “Satellite Save-Restore”
feature from a remote computer, the satellite data is saved on the
disk at the remote computer, and the satellite data is restored from
the disk in the remote computer.
Notes: