WattMaster WCC II - Manual (Page 87)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-55
Week Schedule Summary W_____
Specifi es the number of the fi rst week schedule to be displayed on
the Summary Screen. The system can display summary information
for 20 schedules at one time.
To view or edit a specifi c week schedule, simply use the arrow
keys to position the cursor (shown as “>” along the left hand side
of the screen) to the desired point and press
. The week
schedule for the specifi ed point will now appear.
Time Date
The present time and date will automatically appear at these
locations.
Description: ____________
The description message which was entered on the Week Schedule
Screen is displayed here to aid you in identifying the individual
week schedules within the system.
State
There are two messages which appear under this heading. The fi rst
one is the On/Off message the user enters on the Week Schedule
Screen. The second message is the current status of the week
schedule.
Used by Optimals
The optimal start programs within this system are based on
week schedules. That is to say, the optimal start programs will
automatically start the heating and air conditioning equipment at
the latest possible moment each morning and yet have the space at
the desired temperature level when a week schedule goes “ON.”
The optimal start programs within the system that are based on
the particular week schedule will be shown next to that week
schedule.
WEEK SCHEDULE SUMMARY SCREEN
-----------------------------------------------------------------------------------------
Week Schedule Summary W 1 Time Date
14:17 7/07
Description State Used by Optimals
W1 : STANDARD SCHEDULE On ON S1
W2 :
W3 :
W4 :
W5 :
W6 :
W7 :
W8 :
W9 :
W10:
W11:
W12:
W13:
W14:
W15:
W16:
W17:
W18:
W19:
W20:
HOME for menu
-----------------------------------------------------------------------------------------
WEEK SCHEDULES