WattMaster WCC II - Manual (Page 78)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-46
The ECC/WCC II system will accept up to 30 On/Off messages
which can have up to eight characters each. The number which
corresponds to the message is entered on a Data Input Screen. As
the number is entered, the system automatically prints the message
on the Data Input Screen and the appropriate summary screen(s).
The ECC/WCC II will accept up to 24 units of measure messages
which can have up to 6 characters each. The number which
corresponds to the message is entered on a Data Input Screen. As
the number is entered, the system automatically prints the message
on the Data Input Screen and the appropriate summary screen(s).
If you are beginning to “program” the ECC/WCC II system for the
fi rst time, you may wish to print these screens. To print a screen,
fi rst press
and then press . The system will then
print the screen on the printer.
-----------------------------------------------------------------------------------------
On/Off Messages
1. On 11. 21.
2. Off 12. 22.
3. Fan On 13. 23.
4. Fan Off 14. 24.
5. Open 15. 25.
6. Closed 16. 26.
7. Lght On 17. 27.
8. Lght Off 18. 28.
9. CHW 19. 29.
10. Econ 20. 30.
Units-of-Measure Messages
1. Deg F 9. 17.
2. % 10. 18.
3. PSI 11. 19.
4. % Sun 12. 20.
5. IN WG 13. 21.
6. KW 14. 22.
7. 15. 23.
8. 16. 24.
-----------------------------------------------------------------------------------------
ON/OFF UNITS OF MEASURE MESSAGE SCREEN