WattMaster WCC II - Manual (Page 114)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-82
Global #: ____
Specifi es the global number and its type. Because this is a choice
fi eld, the list of available choices will be displayed at the bottom
of the screen:
CHOICES:
Make your selection by pressing the once for each
choice until the desired global type has been selected, and then
press
. (If you select a global type that is different than
that currently being displayed, the screen will be rewritten with the
appropriate screen information.)
If you would like to edit a different global, simply position the
cursor to this fi eld by using the cursor positioning (arrow) keys,
enter the desired global number, and press
. The new
screen will automatically appear.
name is ______
Specifi es the name (point address) of this binary global. Any
changes to the global number (above) will be refl ected in this point
address (e.g., BINARY Global #: 28 would show GB28 as the
name).
Description: ________________
Specifi es a short message which is displayed on Summary and Data
Entry/Editing Screens to aid you in remembering points within the
system. You may enter up to 20 characters (control, codes, ALT
codes, and the double quote character are not allowed).
On Message #: ____ Off Message #: ____
Specifi es a pair of message numbers, one for the binary global OFF
state and the second for the binary global ON state. These numbers
are used by the system to reference a textual message which is
displayed in association with this binary global.
Mode: Combinatorial
Specifi es the mode used to generate the ON or OFF value of the
binary global. Because this is a choice fi eld, the list of available
choices will be displayed at the bottom of the screen:
CHOICES:
Make your selection by pressing the once for each
choice until the desired mode has been selected, and then press
. Whenever you change modes, you must fi rst clear the
existing screen by using the feature.
Value is ____ when ____ of the following conditions are
met
Specifi es the state (or value) that the binary global will take if the
specifi ed conditions are true. Because these two fi elds are choice
fi elds, the list of available choices will be displayed at the bottom
of the screen:
CHOICES: and
BINARY GLOBAL SCREEN
COMBINATORIAL MODE
-----------------------------------------------------------------------------------------
BINARY Global #: 1 Name is GB1
Description: Global Binary 1 On Message #: 1 ON
Mode: Combinatorial Off Message #: 2 OFF
Value is OFF when ANY of the following conditions are met.
1L1 is ON default false
W1 is ON default true
In local set this global defaults to ON.
-----------------------ALARM-------------------------
Set Condition: None Type: 0 Message 0
HOME for menu
-----------------------------------------------------------------------------------------