WattMaster WCC II User Manual
Page 177
Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces
3-145
The SAT II-B is seen as 4 satellite controllers through the ECC/
WCC II Screens. A SAT II-B can communicate with up to 32 TUC-
VR’s; therefore, each “satellite controller” within a SAT II-B can
handle up to 8 TUC-VR’s.
For example, if you have a SAT II-B addressed #4, it will be seen
as satellite controllers #4, 5, 6, and 7 through the screens of the
ECC/WCC II. TUC-VR’s 1-8 will be seen through the screens for
satellite #4, TUC-VR’s 9-16 will be seen through the screens for
satellite controller #5, TUC-VR’s 17-24 will be seen through the
screens for satellite #6, and TUV-VR’s 25-32 will be seen through
the screens for satellite controller #7.
If the SAT II-B is named #4, and you would like to set up the
screens for TUC-VR #20, you should access Analog Input
Screen #4, Control Output Screen #4, and TUC-VR Set-Up
Screen #4 on satellite #6.
Notes:
SAT II-B #4
Screen
SAT II-B #
1
2 3
4
5
6
7
8
4 (Base Number)
TUC1
TUC2
TUC3 TUC4 TUC5 TUC6
TUC7
TUC8
5 (Base Number+1)
TUC9
TUC10 TUC11 TUC12 TUC13 TUC14
TUC15
TUC16
6 (Base Number+2)
TUC17 TUC18 TUC19 TUC20 TUC21 TUC22
TUC23
TUC24
7 (Base Number+3)
TUC25 TUC26 TUC27 TUC28 TUC29 TUC30
TUC31
TUC32