WattMaster WCC II User Manual
Page 229
Section 5: Installation Guide
WCC II Operator’s Guide
Operator Interfaces
5-27
The SAT II-A
The STATUS 1 light on the front of the SAT II-A controller
should fl icker. If it is off or on solid, the SAT II-A is not operating
properly.
The function of STATUS lights 2 and 3 has not been defi ned at
this time.
The RECV light fl ickers when the SAT II-A is receiving information
from the TUC’s.
The XMIT light fl ickers when the SAT II-A sends information to
the TUC’s.
The POWER light should be on continuously when there is power
to the SAT II-A.