WattMaster WCC II User Manual
Page 74
Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces
3-42
The week schedule will obey the entries listed on the HOL line
when a holiday occurs. In this example, the week schedule will be
off on the dates listed as holidays on the Holiday Screen. (When
the system sees ---, it will remain in its present state until it sees the
next on or off command.)
There must be at least eight hours between the Start time and End
time of the Holiday. If a shorter time is needed, you will need to
set up the strategies within the Override Screen, described on page
3-40.
The data on this screen DOES NOT erase itself after the holiday has
been completed. If you need to erase a particular holiday, simply
position the cursor over the value in the month column at the left
hand side of the screen of the holiday in question. Press
and then
, holding both keys down at the same time and
then releasing them. The
feature will clear out one
holiday at a time. To perform the
function, you
must have a level 3 access code.
------
WEEK SCHEDULES ------
Description:
Week
Schedule#1
Current
status
Week Off
OFF
WED 1456
On Message #:
1
Week On
Password level req’d to alter: 2
Off Message #:
2
Week Off
DAY
EVENT EVENT EVENT EVENT EVENT
EVENT
---------------------------------------
MON on 0700 off 1800
--- ---
---
---
TUE on 0700 off 1800 --- ---
---
---
---------------------------------------
WED on 0700 off 1800
--- ---
---
---
THR on 0700 off 1800 --- ---
---
---
---------------------------------------
FRI on 0700 off 1800
--- ---
---
---
SAT on 0900 off 1500 --- ---
---
---
---------------------------------------
SUN on 1200 off 1500
--- ---
---
---
HOL off
---
--- ---
---
---
---------------------------------------
HOME for menu