WattMaster WCC II - Manual (Page 31)

Section 2: Initiating the System
WCC II Operator’s Guide
Operator Interfaces 2-7
Note: To access the system, the password codes must be
entered exactly as they were entered on this screen, including
any spaces which were entered using the space bar.
Password Entry
To be able to make any changes to the inputs in the system, you
must have a password which has either a level 1, level 2 or level
3 access assigned to it. You enter your password by following the
steps in this section.
STEP #1 : With the Main Menu showing on the screen, place
the cursor above “System Parameters” and press to
access the System Parameter Screen. The System Parameter
Screen should come into view with the computer awaiting the
operator ID.
STEP #2 : Input your assigned operator code and press
. The cursor will automatically move to the right and
await the code ID.
STEP #3 : Input your assigned code ID and press .
You are now “signed on” and may enter and/or change data as
necessary.
Note: You must enter your exact password. The system
distinguishes between upper and lower case letters, and it
recognizes spaces which are created using the .