WattMaster WCC II - Manual (Page 20)

Section 1: General Instructions
WCC II Operator’s Guide
Operator Interfaces 1-10
Alarm Print-Out and Call-Out
The ECC/WCC II will automatically print alarms as they occur
on a local printer or will call out over standard telephone lines
and report the alarms to a remote printer. There are eight different
alarm types or alarm priorities. The fi rst fi ve alarm types can “call-
out”; each of these fi ve alarm types can call a primary and alternate
number.
The following is a sample of the ECC/WCC II print-outs:
-----------------------------------------------------------------------------------------
ECC/WCC II SYSTEM ID: *** TEMPERATURE INDUSTRIES, INC. *** 14:36 10/08
ALARM: ANALOG LIMITS
SAT #: 1 [SCIENCE RM] Input: 1 went into alarm at 14:36 on 10/08. High: 80.6 Deg F
low: ****** Deg F Class: 4
OPERATOR LOG-ON
Operator 33333 logged-on locally at 14:37 on 10/08 [Pswd Level: 3]
ALARM: RUN-TIME
SAT #: 1 [GYM FAN] Point: 5 went into alarm at 14:39 on 10/08. [OIL BEARINGS] Value:
501 Hours Class: 3
OPERATOR LOG-OFF
Operator 33333 logged-off locally at 14:39 on 10/08 [Pswd Level reset to 0]. (Logon
time: 0 hours 2 minutes)
OPERATOR LOG-ON
Operator JOHN logged-on locally at 14:40 on 10/08 [Pswd Level: 3]
OVERRIDE
Override for W1 entered at 14:40 on 10/08. Start: 14:40 on 10/08 End: 18:40 on 10/08
Override value: OFF
OPERATOR TIME-OUT
Operator JOHN timed-out locally at 14:43 on 10/08 [Pswd Level reset to 01]. (Logon time:
0 hours 3 minutes)
-----------------------------------------------------------------------------------------