WattMaster WCC II - Manual (Page 29)

Section 2: Initiating the System
WCC II Operator’s Guide
Operator Interfaces 2-5
Generally, the ECC/WCC II systems with less than 20 satellite
controllers which do not use the optional telephone override feature
or the color graphics feature require three 3.5 inch fl oppy drives to
back up the hard disk.
Floppy Disk #1 System Files Help Files
AUTOEXEC.BAT HELP*.*
MCOMM33.COM
BACK###.EXE
GO2.COM
WCC2###.EXE
Floppy Disk #2 Data Files
*.DAT
Floppy Disk #3 Custom Screen Files
*.TXT
Files can be copied from the hard disk to the fl oppy disk without
exiting from the ECC/WCC II program by using the WCC/SCC
File Management Screen. Complete the following steps to make a
back-up copy of the hard disk:
Label three 3.5 inch formatted, blank disks as follows
Disk #1 - ECC/WCC II Back-up Disk #1 - System and
Help fi les
Disk #2 - ECC/WCC II Back-up Disk #2 - Data fi les
Disk #3 - ECC/WCC II Back-up Disk #3 - Custom
Screen fi les
Access the Utility Screen, then move the cursor down to
“WCC/SCC File Management” and press
.
Insert Disk #1 in drive A and fi ll out the WCC/SCC
File Management Screen as shown below to copy the
AUTOEXEC.BAT fi le from drive C to drive A:
---------------------------------------------
File name: AUTOEXEC.BAT
New fi lename: A:AUTOEXEC.BAT
Direction: WCC
Action: Copy
---------------------------------------------
Leave Disk #1 in drive A and fi ll out the WCC/SCC
File Management Screen as shown below to copy
MCOMM33.COM and GO2.COM from drive C to
drive A:
1.
2.
3.
4.
--------------------------------------------
File name: *.COM
New fi lename: A:*.COM
Direction: WCC
Action: Copy
---------------------------------------------
Leave Disk #1 in drive A and fi ll out the WCC/SCC File
Management Screen as shown below to copy WCC###.
EXE and BACK###.EXE from drive C to drive A:
---------------------------------------------
File name: *.EXE
New fi lename: A:*.EXE
Direction: WCC
Action: Copy
---------------------------------------------
Leave Disk #1 in drive A and fi ll out the WCC/SCC File
Management Screen as shown below to copy the help
fi les from drive C to drive A:
---------------------------------------------
File name: HELP*.*
New fi lename: A:HELP*.*
Direction: WCC
Action: Copy
---------------------------------------------
Insert Disk #2 in drive A and fi ll out the WCC/SCC File
Management Screen as shown below to copy the data
fi les from drive C to drive A:
---------------------------------------------
File name: *.DAT
New fi lename: A:*.DAT
Direction: WCC
Action: Copy
---------------------------------------------
5.
6.
7.