Operator codes screen – WattMaster WCC II User Manual
Page 77
Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces
3-45
Operator
Specifi es the
password that identifi es an operator. A character,
symbol, number or a space (press
) should be entered
for each of the fi ve spaces (control codes, ALT codes, and double
quote characters are not allowed).
Note:
The Operator ID must be 5 digits or the ECC/WCC II
system will allow the operator access without requiring the 4
digit code.
Code
Specifi es a password code for that operator. This protects the
system from unauthorized use. A character, symbol, number, or
space (press
) should be entered for each of the four
spaces (control codes, ALT codes, and double quote characters are
not allowed).
Level
Specifi es the level of priority that is to be assigned to an operator.
This value can range from zero (lowest priority) to 3 (highest
priority).
-----------------------------------------------------------------------------------------
Operator
Codes
Operator
Code
Level
1.
33333
3333
3
2.
JohnB
9876
2
3.
0
4.
0
5.
0
6.
0
7.
0
8.
0
9.
0
10.
0
11.
0
12.
0
13.
0
14.
0
15.
0
16.
0
Level 0 = View Only
Level 1 = General Entry Allowed
Level 2 = Level 1 + modes, globals & energy management options
Level 3 = Level 2 + system parameters & operator codes
HOME for system parameters
-----------------------------------------------------------------------------------------
OPERATOR CODES SCREEN