WattMaster WCC II - Manual (Page 33)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-1
SECTION 3: SCREEN DESCRIPTIONS
____________________________________________________
HELP SCREEN
: HELP SCREEN - SPECIAL
PURPOSE KEYS
The special purpose keys are a very powerful and necessary part
of the ECC/WCC II system, but they can also be very dangerous
if you are not sure how to use them. Therefore, most of the special
purpose keys require that the operator have the highest level
password (3).
The Help Screen, depicted in the three Help menus that follow,
can be accessed from nearly any screen within the ECC/WCC II
system by fi rst pressing
and then and then releasing
both keys at the same time.
****** Help Menu (I) ******
Group 1: General Ctrl-Function keys
Ctrl A: Acknowledge Alarms
Used at Analog Input Summary Screen, Trend
Logging Run Time Screen, Alarm Summary
Screen and Global Analog/Binary Summary
Screens.
Ctrl G: Display Graphs
Used at the Analog Trend Screen, Proportional
Reset Screen and the
Ctrl K: Clear communication errors
Used at Satellite Summary Screen for trouble-
shooting
Ctrl R: Manually Reset (Clear) Data
Used at Trend Log Screen, Global Analog
Integral Mode to Reset accumulated consumption,
Energy Consumption screen to reset
consumption, or in the “Disabled by” position on
the System Parameters Screen to clear alarm call-
out for one type
Ctrl S: Hold Screen
Used at Analog Input Summary Screen, press any
key to start displaying again
Ctrl Home: Clear Input Data from Present Screen
Cursor must be in the “HOME” position on the
screen
Ctrl PgUp: Return to the SAT # position in the main menu
screen
****** Help Menu (II) ******
Group 2: General Alt-Function keys
Alt C: Copy Data to Present Screen
Alt F: Copy Data from Present Screen
Alt A: Clear All Satellite Alarms
Used in the Satellite Summary Screen
Group 3: Keys used for Special Keys Program
Alt A: Enter Append mode; used at SAT # in main menu
screen
Alt E: Stop Learning or Append Mode
Alt N: Generate a Form Feed in the Replay Mode
Alt L: Enter learning mode; used at “Sat #” in main menu
screen
Alt P: Generate a Print Screen in the Replay Mode
Alt Q: Quit replay mode before fi nished
Alt S: Start replay mode; used at “Sat #” in main menu
screen
Alt T: Print a screen on the remote printer in the replay
mode
Group 4: Keys used for saving and loading data fi les in Analog
Trend Screen
F9: Save current analog trend data to disk
F10: Load stored data fi le from disk
ESC: Stop viewing data from disk, and go back to current
data
****** Help Menu #3 ******
Group 5: Help Keys
Alt H: General Help Information
Alt J: Help Menu for each different screen
F1: Window Help Screen for each Input