WattMaster WCC II - Manual (Page 132)

Section 3: Screen Descriptions
WCC II Operator’s Guide
Operator Interfaces 3-100
II to report an “SOS” alarm if it has received 10 “Satellite Failure”
messages in a row.
If the user does not specify a number in this section, the ECC/
WCC II will report an “SOS” alarm after one “Satellite Failure”
message. We have found that our method of determining whether a
satellite is still communicating is too sensitive, and we recommend
a number between 5 and 10 for most systems if problems of this
type are encountered.
Disable Energy Consumption print out: NO
If the system is using one or more of the 10 Energy Consumption
Screens, the accumulated data will automatically be printed once
an hour. If you do not want the ECC/WCC II to print this energy
consumption report each hour, enter a “NO” in this section. Pressing
the
will change the value from YES to NO. Pressing
when the desired value is displayed will enter that choice.
“YES” is assumed by the system unless instructed otherwise.
Clear disk-write-error fl ag: NO
If the ECC/WCC II cannot write a fi le to disk because there is
not enough space left on the disk, a “disk-write-error” message
will appear on the Main Menu Screen. To clear the message, select
“Yes” as the choice for this fi eld.
Time delay for screen blank: 5 minutes
If the system does not detect any keyboard activity for this amount
of time, the screen will go blank. The screen is restored by pressing
the
.