Measurement Computing DBK Part 2 - Manual (Page 291)

DBK215
16-Connector BNC Connection Module
With 68-Pin SCSI Adaptability for Analog I/O, Digital I/O, & Pulse/Frequency
Overview …… 1
Block Diagram …… 2
Connection Tips…… 3
System Examples …… 4
Using the Screw-Terminal Blocks …… 5
Adding RC Filter Networks …… 11
Specifications …… 13
DBK215 Front Panel
Upper Slot for Terminal Board Wiring Pass-Through
Lower section of 16 BNC Connectors
The DBK215 module is compatible with the following products:
•
DaqBoard/500 Series
• DaqBoard/1000 Series • DaqBoard/3000USB Series
Overview
DBK215 Rear Panel
Includes a 68-pin SCSI connector designated as P5.
The DBK215 module includes:
o
BNC Access to 16 inputs or outputs (on front panel)
o
on-board screw-terminal blocks*
o
on-board socket locations for custom RC Filter networks*
o
68-pin SCSI connector (on rear panel)
* The top cover plate must be removed to access the terminal blocks and
the RC filter network section of the board.
The DBK215’s 68-pin SCSI connector (P5) connects to another SCSI connector on the main device, e.g.,
DaqBoard/500, /1000, or /3000USB Series board. Connection between the DBK215 and the board is made
via a CA-G55, CA-G56, or CA-G56-6 cable. Cable descriptions are provided on page 2.
The DBK215 provides BNC and screw-terminal access to all analog and digital I/O from the host data
acquisition device. Related to the screw-terminals is a front panel slot for routing all I/O wiring.
Reference Note:
DBK215 is intended for DaqBoard/500, /1000, and /3000USB Series applications. Refer to
product-specific documentation for detailed information. For information concerning
similar16 channel BNC connectivity/interface boards, designed for use with other products,
refer to the DBK213 and DBK214 sections of the DBK Options manual (p/n 457-0905).
DBK Option Cards and Modules 897994 DBK215 pg. 1