Measurement Computing DBK Part 2 - Manual (Page 188)

pg. 14, DBK90 907492 DBK Option Cards and Modules
Ordering Information
Note: Ordering information is subject to change without notice.
Description Part No.
1 DBK90 56 channel thermocouple input module DBK90
2 Mounting kit for mounting one DBK90 to another DBK90 1109-0800
3 Rack-mount kit (2U high rack-mount kit for rack mounting one DBK90
module) 1109-0801
4 Mounting kit for attaching 1 or 2 DBK90 modules on top of a
primary data acquisition device which has no protective ears 1109-0802
5 Mounting kit for attaching 1,2, or 3 DBK90 modules on top of a DBK60
which has no protective ears 1109-0803
6 Molded corner mounting kit for attaching 1 or 2 DBK90 modules on top of
a primary data acquisition device which has protective ears 1109-0804
Cables, DB37 type, female-to-female
Note: The CA-37x ribbon cable can be used in lieu of the CA-255-x molded T cables.
8
2.38" Molded T-Cable Kit*
Used with 1U(Short) devices, e.g., LogBook/300, DaqBook/2001, DaqBook/2005,
DaqLab/2001, and DaqLab/2005
CA-255-2T
9
4" Molded T-Cable Kit*
Typically used with 2U(Tall) devices, e.g., LogBook/360, DaqBook/2020, and WBK40/41
CA-255-4T
10
Ribbon Cable
Various lengths represented by x. The CA-37-x ribbon cable can be used in
lieu of the CA-255-x molded T cables. CA-37-x is typically used with DaqScan.
CA-37-x
11
7” Shielded Ribbon Cable
Recommended for scenarios in which signal noise is a problem.
CA-143-7
12
18” Shielded Ribbon Cable
Recommended for scenarios in which signal noise is a problem.
CA-143-18
13 2mm banana plug for DBK90’s analog common connector (ACOM). Pomona®
Electronics
p/n 5936-0
* Molded T-Cable Kits include cable, guide sheet, cap plug and panel screws