Measurement Computing DBK Part 2 - Manual (Page 200)

With One DBK101 and Full Bank Mode Disabled
Base Channels 0, 1, 2, and 3 are occupied
Reference Note:
In relation to the above figure, you may want to review the section, DBK101 Hub Configuration,
on page 7. The section pertains to full-banks, half-banks, base channels, and associated DIP
switch settings.
3.
From the Channel Setup Tab (following figure) select the thermocouple types as applicable.
Do this for each channel. Note that channels will be listed as DBK100 channels.
Channel types can be changed by double-clicking in the Type column, or by using the
Channel Type pull-down list.
pg. 12, DBK100 Series 907994 DBK Option Cards and Modules