Measurement Computing BTH-1208LS Quick Start - Manual

BTH-1208LS
Quick Start
This document exp lains how to get the BTH-1208LS device connected and
running in a Windows® or Android™ environ ment.
System requirements
The device is supported under the following operating systems:

Microsoft® Windows® 8/7/ Vista®/XP (SP2) (32-bit or 64-b it)

Android™ 3.1 or later
The Bluetooth radio host used with the device must support Bluetooth 2.0 or
later. The following Bluetooth stack protocols are supported on Windows:

Microsoft Bluetooth stack

Broadco m® Bluetooth stack (not supported by Windows XP SP3)
InstaCal is required to install, configure, and test the BTH-1208LS on
Windows platforms.
Measurement Co mputing recommends that you connect one of the digital
grounds (
GND ) to earth ground to reduce the chance of the BTH-1208LS
unexpectedly powering down due to electrostatic discharge.