Measurement Computing DBK Part 2 - Manual (Page 182)

pg. 8, DBK90 907492 DBK Option Cards and Modules
Mounting a DBK90 to a Rack – Using Rack-Mount Kit # 1109-0801
You can use Rack-Mount Kit # 1109-0801 to mount a DBK90 module to a standard instrument rack. The
kit includes 2 rack mount ears, 2 rack-mount extenders, 4 button-head hex screws, 4 Phillips flathead
screws, and a hex wrench.
Rack-Mount Kit # 1109-0801
Refer to the figures and to the following steps to prepare a DBK90 module for rack mounting.
Mounting an Ear/Extender Assembly to a DBK90
1. Align the screw-holes of a Rack-Mount Ear to the matching holes on a Rack-Mount Extender.
2. Fasten the two parts together using 2 of the Phillips Flathead Screws. The Ear/Extender
assembly should resemble the one in the above illustration.
3. Using 2 Button-head Hex Screws, secure the Ear/Extender assembly to the DBK90 module.
Proper orientation is indicated in the above figure.
4. Using the Hex Wrench [provided], tighten the Hex Screws.
5. Repeat steps 1 through 4 for assembling the remaining Ear/Extender components and attaching
them to the other side of the DBK90.
At this point the assembly can be mounted to a standard instrument rack.