Measurement Computing DBK Part 2 - Manual (Page 257)

Software Setup
Note: DBK210 is not applicable to LogBook or LogView.
To use DBK210 from within DaqView, you must first configure the DaqView software to match the
hardware setup.
1.
From DaqView’s main window, select the Device pull-down menu.
2.
Select Configure Hardware Settings.
The Digital Option Cards External Connection section of DaqView’s Configure System Hardware
window lists 8 channels (0 through 7) as shown in the following screen image.
3.
Select DBK210 from the pull-down list in the Digital Option Cards panel. As seen in the following
figure, the panel is on the right side of screen.
Selecting DBK210 in the Configure System Hardware Window
4.
Click . A DBK210 Configuration Settings window will appear (following figure).
DBK Option Cards and Modules 987594 DBK210, pg. 7