Measurement Computing DBK Part 2 - Manual (Page 249)

Connection tips:
•
Ensure power is removed from the device(s) to be connected.
• Observe ESD precautions when handling boards and making connections.
•
P1 is used for ANALOG I/O.
• P2 is used for DIGITAL I/O.
• P3 is used for Pulse/Frequency (Digital and Counter/Timer) I/O.
•
P4 (100-pin connector) connects to the DaqBook/2000 Series device’s,
DaqBoard/2000 Series board’s, or cPCI DaqBoard/2000c Series board’s P4 connector via a
CA-195 Cable.
DBK209 Dimensional Drawing
DBK Option Cards and Modules 909094 DBK209, pg. 3