Dbk208 – specifications – Measurement Computing DBK Part 2 User Manual
Page 245
DBK Option Cards and Modules
987594
DBK208, pg. 9
DBK208 – Specifications
Name/Function: Carrier Board for Opto-22 Compatible Solid-State-Relays
Module Capacity: 16, Opto-22 Solid-State-Relays
Cable (optional): CA-37-×
DC Input Fuse: 0.5A, re-set type
Power Requirement: 5 VDC, regulated. 0.25 amp minimum.
Operating Environment:
Temperature: 0°C to 70°C
Relative Humidity: 95% RH, non-condensing
Connectors:
P4 – 100-pin connector provides for connection to a DaqBook/2000 Series device’s,
DaqBoard/2000 Series board’s or cPCI DaqBoard/2000c Series board’s
P4 connector via a CA-195 cable.
P2 – Two P2 (DB37) connectors provide for digital expansion via CA-37-x cable.
Screw Terminals – 16 sets of 2-connector blocks for I/O signals.
Isolation:
Channel-to-System: 500 V
Channel-to-Channel: 500 V