Measurement Computing DBK Part 2 - Manual (Page 260)

DBK210, pg. 10 987594 DBK Option Cards and Modules
DBK210 – Specifications
Name/Function: Carrier Board for Grayhill TM 70M-Series Mini-Modules
Module Capacity: 32 Grayhill 70M-Series Mini-Modules per board
Cable (optional): CA-37-×
DC Input Fuse: 3.0A, resettable type
DC Input Connector: Non-removable screw terminal, (+5 VDC, GND)
Power Requirement: 5 VDC, ±5%. 0.600 amp minimum.
Operating Environment:
Temperature: 0°C to 70°C
Relative Humidity: 95% RH, non-condensing
Connectors:
P1 – One P1 (DB37) connector provides for Analog input expansion via a CA-37-x cable.
P2 – Two P2 (DB37) connectors provide for digital expansion via a CA-37-x cable.
P4 – 100-pin connector provides for connection to the P4 connector of a DaqBook/2000
Series device, DaqBoard/2000 Series board, or cPCI DaqBoard/2000c Series board.
P4-to-P4 connection is made via a CA-195 cable.
Screw Terminals – 4 removable screw-terminal blocks. Each block has 16 connections for 8
mini-modules, i.e., 2 connections (+/-) per module.
Isolation:
Channel-to-System: 250 V
Channel-to-Channel: 250 V
Note: Specifications are subject to change without notice.