KEYENCE LT-9001 Series - Manual (Page 87)

Chapter
5
Common
Operations
and Function
Settings
Outline of Common Operations
and Function Settings
This chapter describes the operations and
functions common to the displacement mode and
profile mode. Refer to "Chapter 3 Operations and
Function Settings in the Displacement Mode"
(page 3-1) for the functions unique to the
displacement mode, and "Chapter 4 Operations
and Function Settings in the Profile Mode" (page
4-1) for the functions unique to the profile mode.
Outline of Operations and Functions ......................5-2
Microscope Function. ..............................................5-2
Hold Function ..........................................................5-3
Auto-zero Function ..................................................5-4
Keylock Function .....................................................5-5
Program Change .....................................................5-6
OUTPUT Settings ....................................................5-7
LIMITS (Tolerance) ..........................................5-7
OUTPUT (Output) ............................................5-8
CALIB (Calibration) ........................................5-16
OPTIONAL Settings ..............................................5-18
DISPLAY ........................................................5-18
I/O...................................................................5-20
GAIN (Sensitivity). ..........................................5-20
5-1
E LT-9001-IM
5
Chapter
Common
Operations
and
F
unction
Settings