KEYENCE LT-9001 Series - Manual (Page 52)

3-6
Measurement Screen
Switching the display of OUT1 and OUT2
The trend graph of OUT1 and OUT2 can be switched
by using the [ ▲] and [▼] buttons.
Setting the upper and lower limits of the
trend graph display
Any part of the graph can be zoomed in by scaling
the upper and lower limits.
The procedure used to set [UP LIMIT] and [LO LIMIT]
is explained as follows.
1
Select [UP LIMIT] using the [ENTER] button.
The cursor is placed on [UP LIMIT].
2 Select [UP LIMIT] or [LO LIMIT] by using the
[
▲] and [▼] buttons and press the [Enter]
button.
3
Press the [ENTER] button after changing the
value.
The value you entered is fixed.
Refer to "Default Values and Setting Range"(page
2-25) for the setting range and limitations.
If the [ZERO] button is pressed while entering the
value, the parameter is set to "0".
Reference
E LT-9001-IM
Operations
and
Fun
ction
Settings
in
the
Displacement
Mo
de
3
Chapter
OUT1
display
OUT2
display
+300
+100
-100
+100
-100 -300
OUT1
display
OUT2
display