KEYENCE LT-9001 Series - Manual (Page 51)

Measurement Screen
Switching the single and double display
The single and double display of OUT1/OUT2 can be
switched by pressing the [ ▲] and [▼] buttons.
The changes of the measured value in time can be
displayed as a trend graph.
• The trend graph is displayed within the area
between the [UP LIMIT] and [LO LIMIT].
• The trend graph indicates the values of OUT1 or
OUT2 measured according to the respective
settings.
Refer to “SCROLL" (page 5-18) for the scroll speed of
the trend graph.
Reference
Display of the Trend Graph
3-5
The measured value and the trend graph can be
displayed in the measurement screen.
The graph, which is called a trend graph, displays
the change of measured values taking the vertical
axis as displacement and the horizontal axis as time.
You can specify two types of settings, OUT1 and
OUT2, modifying the measured value for the
respective purpose such as averaging, offset and
calibration. These values can be displayed.
Refer to “OUT Settings" (page 3-10) for details.
Single display of OUT1 or OUT2
Displays OUT1 or OUT2 individually.
Also displays the measured value and the judgment
determined by limits.
Double display of OUT1 and OUT2
Displays OUT1 and OUT2 at the same time.
You can see two types of measured value on the
screen.
Display of Measured Value
Reference
E LT-9001-IM
3
Chapter
Operations
and
Fun
ction
Settings
in
the
Displacement
Mo
de
Measured value Measured value display
The areas within the range
Judgment displays [GO] in
between the upper and
green.
lower limits of [LIMITS]
(Tolerance)
Over the upper limit
Judgment displays [HI] in red.
[LIMITS] (Tolerance)
Under the lower limit
Judgment displays [LO] in red.
[LIMITS] (Tolerance)
Measured value Measured value display
The areas within the range between
the upper and lower limits Displayed in green.
[LIMITS] (Tolerance)
Over the upper and lower limits
Displayed in red.
[LIMITS] (Tolerance)
OUT1
Single
display
OUT2
Single
display
OUT1/
OUT2
Double
display