KEYENCE LT-9001 Series - Manual (Page 18)

Before
Use
1
Chapter
E LT-9001-IM
1-8
Mounting and Connecting Parts
Use the controller on a level place.
• Keep enough room around the controller for ventilation.
• When the temperature in the controlling system unit rise over 35 °C, decrease
the ambient temperature no more than 35 °C by cooling it down with cool air or by
make room around the system.
• Do not use the controller on other devices.
Connect the measuring unit, the controller, the remote control console, the
monitor and the power supply with cables.
• Turn off the power supply of the controller before connecting/disconnecting
cables. Failure to do so may cause malfunction.
• Eusure correct orientation of all connectors. Otherwise the pins may break and
may lead to system breakdown.
• Before connecting the monitor power cable, ensure the correct polarity of the
monitor power terminals. Failure to do so may cause malfunction.
• The 24 V DC terminal on the terminal block is a dedicated power supply unit to
the monitor specified by KEYENCE only. This supply may not be used to power
any additonal hardware.
Note
Connection
Note
Installation of the Controller
Remote control
console
AC cable
LT-9010M
Connecting to
24 V DC terminal
LT-9501
Power supply
cable for the monitor
Monitor connecting
cable
Monitor
CA-MN80
Cable between the controller
and the measuring unit