KEYENCE LT-9001 Series - Manual (Page 19)

Chapter
2
Basic Operations
Outline of Basic
Operations
2-1
E LT-9001-IM
2
Chapter
Basic
Operations
The LT-9001 Series performs settings concerning
the measurement method or displayed
information while in the program mode, and
displays the measurement result value or graph
while in the measurement mode.
You can also switch between displacement mode
and profile mode depending on the target.
This chapter describes the outlines of program
mode and run mode, and the procedures to
operate the LT-9001 Series in displacement mode
and profile mode using the remote control
console.
Displacement Mode and Profile Mode.....................2-2
Outline of Measurement and Settings .....................2-3
Operations .............................................................2-10
Selection Method of the Run Mode .......................2-12
Using the Displacement Mode...............................2-13
Using the Profile Mode ..........................................2-16
Basic Operations that Stabilize Measurement.......2-20
Resetting the Devices to the Factory Settings.......2-22
Default Value and Settings Range ........................2-23
* All the measurement screens used in this User's
Manual are those for the LT-9010(M).
Some screens are different when you are using
the LT-9030(M).