KEYENCE LT-9001 Series - Manual (Page 112)

6-6
How to Set up Environment Setting
You can perform settings related to the program such as the program selection.
Items that can be set
How to copy the program settings
1 Move the cursor to [P-COPY] by using the [ ▲] or [▼] button.
2
Select [P-COPY] with the [ENTER] button.
The cursor moves to the program No. item from which you can select the
program No. to be copied.
3
Select the number of the program to be copied by using the [
▲] or [▼]
buttons.
If you select [EE], the program No. of the copy destination will be initialized.
4 Press the [s] button.
The cursor moves to the program No. item of the copy destination.
5 Select the program No. to which to copy the program settings by using
the [ ▲] or [▼] buttons.
6
Press the [ENTER] button.
The copy is executed and the cursor returns to [P-COPY].
The display returns to [P0 TO P0].
If you select [EE] for the program No. of the copy source, the program No. of the
copy destination will be initialized.
Reference
Program
E LT-9001-IM
Environment
Settings
6
Chapter
Item Description
Program selection [P-SELECT] Selects the program No.
Remote control console [CONSOLE] Selects the program No. by using the remote control
Terminal [TERMINAL] console or the RS-232C interface.
Selects the program No. by using the external input
terminal.
Program copy [P-COPY] Copies the contents of the program to another program No.
The contents of the selected program can also be
initialized.
Initialization of all the program Initializes the setting contents of all the program Nos.
settings [P-CLEAR]