KEYENCE LT-9001 Series - Manual (Page 24)

Basic
Operations
2
Chapter
E LT-9001-IM
2-6
Outline of Measurement and Settings
BASIC settings
Performs settings for the preprocessing common to both OUT1 and OUT2.
Performs settings for the profile measurement method.
Performs settings for the swing width of a spot.
AREA
SCAN
DARK Performs settings for the processing for the case that the light intensity
is lower than the setting range.
MASK
SMOOTH
MODE
Performs settings for the range to be excluded from the measurement.
Performs settings for the functions that stabilize the profile waveform.
Toggles between the displacement mode and the profile mode.
FINE MODE
DARKOUT
SETTING RANGE
AREA1
AREA2
Displacement mode Profile mode Setting item
SCAN WIDTH
SCAN CENTER
(LT-9010 only)
Displacement mode Profile mode Setting item
Displacement mode Profile mode Setting item
MASK
SETTING RANGE
Displacement mode Profile mode Setting item
SMOOTHING
AVERAGING
Displacement mode Profile mode Setting item
MODE
Displacement mode Profile mode Setting item
Chapter 4 "BASIC Settings" -
"Scan width/interval" (page 4-14) Chapter 3 "BASIC Settings" -
"Scan width/interval" (page 3-15)
Chapter 3 "BASIC Settings" -
"Scan center" (page 3-16) Chapter 4 "BASIC Settings" -
"Scan center" (page 4-15)
Chapter 4 "BASIC Settings" -
"FINE mode" (page 4-15)
Chapter 4 "BASIC Settings" -
"AREA" (page 4-13)
Chapter 4 "BASIC Settings" -
"DARK ALARM" (page 4-16) Chapter 3 "BASIC Settings" -
"DARK ALARM" (page 3-17)
Chapter 4 "BASIC Settings" -
"SMOOTH" (page 4-17)
Chapter 3 "BASIC Settings" -
"MASK" (page 3-18)
Chapter 2 "Selection Method of the Run Mode" (page 2-12)