KEYENCE LT-9001 Series - Manual (Page 37)

2
Chapter
Basic
Operations
E LT-9001-IM
2-19
1 Slide the [PROG/RUN] switch downward on
the remote control console to switch to the
program mode screen.
2
Select [BASIC] by using the [
▲] and [▼]
buttons and press the [Enter] button.
3 Place the cursor on [AREA] by using the [ ▲]
and [
▼ ] buttons and press the [ENTER]
button.
4
Place the cursor on [AREA 1] by using the [
▲]
and [ ▼ ] buttons and press the [ENTER]
button.
5 Select [DIFF] by using the [ ▲] and [▼] buttons
and press the [ENTER] button.
The [DIFF] measures the differential between the
maximum and minimum values within a user-
defined area.
6 Slide the [PROG/RUN] switch downward on
the remote control console to display the
measure mode screen.
7
The measured value displayed is that of the
level differences (the differential between the
maximum and minimum values) set within
[AREA 1].
The value can be measured without moving the
measurement target in the profile mode (maximum
value, minimum value, differential between the
maximum and minimum values and area).
Reference
Measuring Height Differences