Lull 6K Service Manual - Manual (Page 563)

Transmission
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K 8-15
Fig. 8-6: DW-3 Controller Signal Combinations Measured At Valve
Solenoids
6. If signal discrepancies are found, check the following:
a. Check DW-3 signals at controller (see page 8-10).
b. Check transmission wire harness (65011D) plug connectors and
wires for security and condition.
c. Check shunt diodes (see page 8-16).
7. If signal are correct, check the following:
a. Check solenoid resistance values: 24–40 W
b. Check transmission pressures. See “ZF Transmission Pressure
Checks” on page 8-23
3WG-100, 3-SPEED TRANSMISSION
DW-3 CONTROLLER SIGNALS MEASURED AT VALVE SOLENOIDS
Forward, Declutch OFF
1
st Gear — M3 M2 M4 M5
2 nd Gear — M3 M4 M5
3 rd Gear — M3 M5
Reverse, Declutch OFF
1
st Gear — M1 M2 M4
2 nd Gear — M1 M4
3 rd Gear — M1
Forward, Declutch ON
1
st Gear — M2 M4
2 nd Gear — M4
3 rd Gear — —
Reverse, Declutch ON
1
st Gear — M2 M4
2 nd Gear — M4
3 rd Gear — —
Neutral
1
st Gear — M2 M4
2 nd Gear — M4
3 rd Gear — —
4WG-100, 4-SPEED TRANSMISSION
DW-3 CONTROLLER SIGNALS MEASURED AT VALVE SOLENOIDS
Forward, Declutch OFF
1
st Gear — M3 M2 M4
2 nd Gear — M3 M4
3 rd Gear — M3
4 th Gear — M5
Reverse, Declutch OFF
1
st Gear — M1 M2 M4
2 nd Gear — M1 M4
3 rd Gear — M1
Forward, Declutch ON
1
st Gear — M2 M4
2 nd Gear — M4
3 rd Gear — —
4 th Gear — —
Reverse, Declutch ON
1
st Gear — M2 M4
2 nd Gear — M4
3 rd Gear — —
Neutral
1
st Gear — M2 M4
2 nd Gear — M4
3 rd Gear — —
4 th Gear — —
E1010