Lull 6K Service Manual - Manual (Page 371)

Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K 6-121
Fig. 6-127: Front Slide Pads, Middle Boom
13. (Ref. Fig. 6-127) Install the front slide pads and shims in the middle
boom section according to drawing specifications. See “Shimming
Procedures” on page 6-91 for details.
a. Install the lower shims (Item 6) and slide pads (Item 5). Install each
pad retainer (Item 7) with a flatwasher (Item 8), lockwasher
(Item 9), and capscrew (Item 10). Torque the capscrew to 200 ft-
lbs.
b. Install each side shim (Item 4) and slide pad (Item 3) with two (2)
lockwashers (Item 2) and button head capscrews (Item 1). Torque
the capscrews to 65 ft-lbs.
Fig. 6-128: Rear Slide Pads, Inner Boom
J 1
287
# Description
1 Button Head Socket Capscrew
2 Lockwasher
3 Side Slide Pad
4 Shim
5 Lower Slide Pad
# Description
6 Shim
7 Pad Retainer
8 Flatwasher
9 Lockwasher
10 Capscrew
1 2
3
4
5
6
7
8
9
10
J
1
283
# Description
1 Upper Slide Pad
2 Shim
3 Pad Retainer
4 Flatwasher
5 Lockwasher
# Description
6 Capscrew
7 Shim
8 Slide Pad
9 Lockwasher
10 Button Head Socket Capscrew
1
2
3
4
5
6
7
8
9
10