Lull 6K Service Manual - Manual (Page 401)

Boom and Transfer
Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K 6-151
Fig. 6-162: Gaps Between Pads and Boom – Rear of 4-Section Boom
10. (Ref. Fig. 6-162) Install/remove shim(s) under indicated pads to obtain
specified clearances making sure clearances on both sides of each
boom section are the same.
Fig. 6-163: Clearances Between Boom Sections – Front of 4-Section Boom
J
1188
0.02"–0.08"
(1/64"–5/64")
0.03"–0.09"
(1/32"–3/32")
0.03"–0.09"
(1/32"–3/32")
0.02"–0.08"
(1/64"–5/64")
0.03"–0.09"
(1/32"–3/32")
0.03"–0.09"
(1/32"–3/32")
Rear of Boom, Looking Forward
J
1189
Front of Boom, Looking Rearward
0.47–0.53" 0.595"–0.655"
(19/32"–
21/32")
0.72"–0.78"
(15/32"–
(23/32"–
25/32")
17/32")
0.72"–0.78"
(23/32"–
25/32")
0.47–0.53"
(15/32"–
17/32")