Lull 6K Service Manual - Manual (Page 332)

Boom and Transfer
6-82 Service Manual — Models 644B, 6K, 844C, 8K, 1044C, 10K
7. (Ref. Fig. 6-82) Tag and disconnect two (2) hoses (Item 3) at the boom
extension cylinder (Item 4). Cap hoses and fittings.
8. (Ref. Fig. 6-82) Tag and disconnect two (2) carriage tilt hoses (Item 2),
and two (2) auxiliary hydraulics hoses (Item 1) at the boom. Cap hoses
and fittings.
Note: “K” Model machines are not equipped with auxiliary hydraulics. For these
models, disregard procedures that refer to auxiliary hydraulic components.
Fig. 6-83: Hose Connections in Inner Boom
9. (Ref. Fig. 6-83) Tag and disconnect two (2) carriage tilt and two (2)
auxiliary hydraulics hoses from the fittings in the boom. Cap hoses and
fittings.
Fig. 6-84: Hose Carrier in Inner Boom
J
1285
Auxiliary
Fittings
Hydraulic
Hoses
Carriage
Tilt Hoses
J
1286
Hose Carrier
Capscrew
Lockwasher
Flatwasher