Adding a new user, Figure 25 add/edit user dialog box, 25 add/edit user dialog box – HP StorageWorks 2.32 Edge Switch User Manual
Page 89

Edge Switch Element Manager user guide
89
A default user is set up in the switch user base. The ID of the user is
Administrator
and the
password is
password
. There is one default user that is displayed in the table, with both Telnet and
HAFM Basic (EWS) check boxes selected.
Adding a new user
To add a new user, do the following:
1.
Click Add.
The Add/Edit User dialog box is displayed (
).
Figure 25
Add/Edit User dialog box
2.
Define all the fields.
User ID must be unique. If you add an ID that exists in the system, it will be rejected. The
maximum length of password is 24 characters.
3.
Click OK.
4.
Assign a role to a user to be either Administrator or Operator.
By default, all new users are set up with an Administrator’s privilege. This can be changed by
clicking the list under the Role column and selecting another option.
The security administrator can delete users from the switch user database. There must be at least one
user with Administrator privilege for Telnet and HAFM Basic. A message is displayed if you try to
delete the last user with Administrator privileges.
If a user is removed from the table, the user cannot access the switch through the Telnet or HAFM
Basic interface. The removed user who is currently accessing a live session with the switch can
continue working on the switch until logging out.