HP StorageWorks 2.32 Edge Switch - Manual (Page 191)

Edge Switch Element Manager user guide 191
Invalid product
selection.
At the New Product dialog box,
an invalid product was selected.
Select a valid product and retry the
operation.
Invalid request.
Three conditions result in this
message:
You tried to add or modify a
product from Product View and
the network address is already in
use. (Network addresses must be
unique.)
You tried to create a new user
with a username that already
exists. (A username must be
unique.)
You tried to delete the default
Administrator user. (The default
Administrator user cannot be
deleted.)
Select the action that is appropriate to
the activity that caused the error:
Network address: Specify a unique
network address for the product.
username: Specify a unique username
for the new user ID.
Administrator user: take no action.
Invalid UDP port
number.
The specified user datagram
protocol (UDP) port number is
invalid. The number must be an
integer from 1 through 65535
inclusive.
Verify and enter a valid UDP port
number.
Invalid World Wide
Name.
The specified WWN format is
invalid. The valid format is eight
two-digit hexadecimal numbers
separated by colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Enter a WWN using the correct format.
Invalid World Wide
Name or nickname.
The WWN or nickname that you
have specified is invalid. The valid
format for the WWN is eight
two-digit hexadecimal numbers
separated by colons
(xx:xx:xx:xx:xx: xx:xx:xx). The
valid format for a nickname is
non blank characters, up to 32
characters.
Try the operation again using a valid
WWN or nickname.
Table 9 HAFM messages (continued)
Message Description Action