HP StorageWorks 2.32 Edge Switch - Manual (Page 139)

Edge Switch Element Manager user guide 139
• Identifier—The user who is making the change according to the source:
• Fabric—No entry is displayed.
• Fibre Channel Host—No entry is displayed.
• HAFM—Includes
user@address
, where
user
is the Element Manager user name and
address
is the network address of the workstation (remote user workstation or HAFM
appliance).
• Maintenance Port—No entry is displayed.
• SNMP—Contains the network address of the SNMP management station.
• Telnet—Change was made through a telnet connection.
• Web Server—The Identifier column contains
user@address
. The
user
is the Web server
user name and
address
is the network address of the Web user.
Event Log
The Event Log provides a record of significant events that have occurred on the switch, such as
hardware failures, degraded operation, and port problems. To open the Event Log, select Logs >
Event Log.
Figure 60 Event Log
All detected firmware faults and hardware failures are sent to the HAFM appliance for recording in
the Event Log. The log provides a maximum of 1000 log entries before it wraps and overwrites the
oldest entries. For detailed information on event data and problem resolution, refer to the
appropriate service manual for your Edge Switch.