beautypg.com

HP StorageWorks 2.32 Edge Switch User Manual

Page 186

background image

Information and error messages

186

Cannot display route.

Device is not a member

of a zone in the

active zone set.

You cannot show the route for a

device that is not a member of a

zone in the active zone set. The

source node that you have

selected is not part of a zone in

the active zone set.

Enable the default zone or activate the

zone for the device before attempting

to show the route.

Cannot display route

on one switch fabric.

You cannot show routes between

end devices in a fabric when

configuring Show Routes

(Configure menu).

Configure Show Routes on a

multi-switch fabric.

Cannot display route.

error 9.

An internal error has occurred

while trying to view routes.

Contact the next level of support to

report the problem.

Cannot display route.

No active zone

enabled.

You cannot show the route

through a fabric with no active

zone.

Enable the default zone or activate a

zone set before attempting to show the

route.

Cannot have spaces in

field.

Spaces are not allowed as part of

the entry for this field.

Delete spaces from the field entry.

Cannot modify a zone

set with an invalid

name. Rename zone set

and try again.

A zone set must have a valid

name to be modified.

Assign a valid name to the zone set,

then modify the name through the

Modify Zone Set dialog box.

Cannot modify a zone

with an invalid name.

Rename zone and try

again.

A zone must have a valid name to

be modified.

Assign a valid name to the zone, then

modify the name through the Modify

Zone Set dialog box.

Cannot modify product.

The selected product cannot be

modified.

Verify that the HAFM

appliance-to-product link is up. If the

link is up:
The HAFM appliance may be busy.
Another Element Manager instance

may be open.
You may not have permission to modify

the product.

Cannot perform

operation. Fabric is

unknown.

No switches in the fabric are

connected to the HAFM

appliance.

Ensure at least one fabric-attached

switch or director has an Ethernet

connection to the HAFM appliance and

retry the operation.

Table 9

HAFM messages (continued)

Message

Description

Action

This manual is related to the following products: