HP StorageWorks 2.32 Edge Switch - Manual (Page 106)

Configuring the switch 106
• The SANtegrity Security Center Security Change Confirmation and Status tab displays multiple
switches in addition to the local switches. The SANtegrity Authentication Security Change
Confirmation and Status tab displays only the local switch.
Viewing the Security Log
You must log in as the Security Administrator or System Administrator to view the Security Log. The
Security Log can be viewed from the following:
• On the main window of the HAFM appliance, select the Security tab and the Security Log is
displayed as a table at the bottom of the window.
• On the main window of your HAFM appliance, click Monitor > Log > Security Log and the
Security Log dialog box is displayed.
• On the main Element Manager window, select the Log menu and Security Log and the Security
Log dialog box is displayed.
The Security Log is displayed ( Figure 34 ).
Figure 34 Security Log
• Severity—The severity level of the event: informational, warning, and fatal.
• User—The user associated with the event.
• Reason—The reason code for the failure.
• Description—The security event category includes the description that lists more details of the
event and the IP address of the product.
• Date and Time—The date and time that the event occurred. The format is
yyyy/mm/dd
hh:mm:ss:tt
. The last two characters (hundredth of seconds) are needed due to a possible
higher frequency rate of some of the advanced logs.
• Count—The number of times that the same event occurs.
• Category—The category.