HP StorageWorks 2.32 Edge Switch - Manual (Page 54)

Monitoring and managing the switch 54
• Threshold alert—If a threshold alert exists for the port, an alert indicator (yellow triangle) is
displayed by the Threshold Alert field, and the configured name for the last alert received is
displayed in the field.
• Zoning enforcement—For switches, this field displays
N/A
.
Displaying switch information
Double-click the switch illustration (near to, but not on, a hardware component) to display the Switch
Properties dialog box, as shown in Figure 12 .
Figure 12 Switch Properties dialog box (Edge Switch 2/32)
The following information is displayed in this dialog box:
• Name—Switch name.
• Description—Switch description.
• Location—Switch location.
• Contact—Personnel to contact.
• World Wide Name—Fibre Channel World Wide Name (WWN) identifier for the switch.
• Type Number—Edge Switch type number.
• Model Number—Product model number.
• Manufacturer—Product manufacturer.
• Serial Number—Product serial number.
• EC Level—Engineering change (EC) level.
• Firmware Level—Firmware version number.
• Management Style—Always set to the Open Systems management style.
• Preferred Domain ID— As set through the Configure Switch Parameters dialog box.
• Active Domain ID—The actual domain ID assigned to the switch.