HP StorageWorks 2.32 Edge Switch - Manual (Page 41)

Edge Switch Element Manager user guide 41
Status bar
The status bar is located along the bottom of the Element Manager window. The status bar displays
a symbol at the left side of the bar and messages that display in the panel to the right of the symbol.
The symbol indicates the current operating status of the switch, and the messages display detailed
description of menu options as you move the mouse pointer over each of the drop-down menus
available from the menu bar.
See
Table 3 on page 41 for the meaning of these status symbols and of the corresponding alert text
that is displayed in the edge switch Status table at the top of the Hardware view in the View panel.
If a gray square is displayed in the status bar (meaning there is no Ethernet connection), a reason
for problem is displayed in the Status table at the top of the Hardware view. See the
No Link
Status
bullet description in ” Switch Status table ” on page 46 for details.
Switch status symbols
Table 3 describes the Status Bar symbols.
Table 3 Status Bar symbols
Status bar
symbol
Switch status table text Description
Green circle
Fully Operational All components and installed ports are operational; no
failures.
Yellow triangle
Redundant Failure A redundant component has failed, such as a power
supply, and the backup component has taken over
operation.
Minor Failure A failure occurred, causing a decrease in the operational
ability of the switch. Normal switching operations are not
affected.
Red diamond
with yellow
background
NOT OPERATIONAL A critical failure prevents the switch from performing
fundamental switching operations.
All fans have failed.
An installed port has failed.
Both power supplies have failed.
Gray square
Never Connected
Link Timeout
Protocol Mismatch
Duplicate Session
Unknown Network Address
Incorrect Product Type
Switch status is unknown. This occurs if the Ethernet
network connection between the HAFM appliance and
the switch cannot be established or if the CTP fails.