Window layout and function, Menu bar, Product menu – HP StorageWorks 2.32 Edge Switch User Manual
Page 26
Element Manager overview
26
1.
Open the Element Manager for the switch from the HAFM desktop, as described in ”
2.
Select Help > Contents or press F1.
Window layout and function
The main Element Manager window is divided into four main areas, as shown in
25: Menu bar, View tabs, View panel, and Status bar. You can use the features in these areas to
configure switch operation, monitor performance, and access maintenance features.
Menu bar
The menu bar on the Element Manager window contains the following menus:
• Product menu, page 26
• Configure menu, page 27
• Logs menu, page 31
• Maintenance menu, page 32
• Help menu, page 33
Click the name of a menu to display a list of menu options. Select an option to open a dialog box
that allows you to perform configuration and maintenance tasks and to view logs.
If a menu option contains a check box, click in the box to add a check mark and enable a function.
Click a check box containing a check mark to remove the check mark and disable the function.
Product menu
Select Product on the menu bar to display a menu that lists the following features:
•
Management style—This option is available on the Edge Switch 2/32 only. It includes the
following options:
• Open Systems—The management style that is used for open fabrics. Open Systems is the
default management style.
• FICON—The management style that is most useful when attaching to IBM S/390 Enterprise
Servers.
•
Port—Provides a secondary port menu only when the Hardware view, Port List view, or
Performance view is displayed. To use this menu for a specific port, click a port in the Hardware
view, a port’s row in the Port List view, or a port’s bar graph in the Performance view. The menu
contains options that are identical to those that appear when you right-click the port, port row, or
port bar graph in those views. For details on these options, see ”
•
FRU—Click a power supply module/fan in the Hardware view only and select Product >
FRU > FRU Properties to display the FRU properties dialog box. You can also display the FRU
Properties dialog box by double-clicking the FRU in the Hardware view. For details on these
options, see ”
•
Clear system error light—Turns off the amber system error light emitting diode (LED), located
below the green/blue power LED on the switch front bezel.