beautypg.com

HP StorageWorks 2.32 Edge Switch User Manual

Page 214

background image

Information and error messages

214

Invalid value for

year.

At the Configure Date and Time

dialog box, the YYYY value (year)

must be a four-digit value.

Verify and enter a four-digit value for

the year.

Invalid World Wide

Name or nickname.

The WWN or nickname that you

have specified is invalid. The valid

format for the WWN is eight

two-digit hexadecimal numbers

separated by colons

(xx:xx:xx:xx:xx: xx:xx:xx). The

valid format for a nickname is non

blank characters, up to 32

characters.

Try the operation again using a valid

WWN or nickname.

Link dropped.

The HAFM appliance-to-director

Ethernet link was dropped.

Retry the operation. Link re-connects

are attempted every 30 seconds. If the

condition persists, contact the next

level of support.

Log is currently in

use.

Access to the log is denied

because the log was opened by

another instance of the Element

Manager.

Retry the operation later. If the

condition persists, contact the next

level of support.

Loopback plug(s) must

be installed on ports

being diagnosed. Press

Next to continue.

External loopback diagnostics

require an optical loopback plug

to be installed.

Ensure that an optical loopback plug is

installed in port optical transceiver

before running external wrap

diagnostic testing.

Maximum number of

versions already

installed.

The number of firmware versions

that can be defined to the HAFM

application’s firmware library

(eight) has been reached.

Delete an existing firmware version

before adding a new version.

No file was selected.

Action requires the selection of a

file.

Select a file.

No firmware version

file was selected.

A file was not selected in the

Firmware Library dialog box

before an action, such as modify

or send was performed.

click a firmware version in the dialog

box to select it, then perform the action

again.

No firmware versions

to delete.

There are no firmware versions in

the firmware library to delete,

therefore the operation cannot be

performed.

Informational message only—no

action is required.

Table 10

Element Manager messages (continued)

Message

Description

Action

This manual is related to the following products: