HP StorageWorks 2.32 Edge Switch - Manual (Page 149)

Edge Switch Element Manager user guide 149
• EOF—The string that contains the End of Frame code abbreviation. Place the cursor over a cell
in this column to display descriptions of the abbreviation.
Change button
If Administrator or Maintenance user rights are set to access the Change button. you can display the
Embedded Port Log Settings Dialog box. If you do not have access to the Change button, an error
dialog box is displayed when you select it.
The Log Settings dialog box log provides a detailed history log of all traffic passing through the
embedded port, as shown in Figure 66 .
Figure 66 Log Settings dialog box (FICON mode)
• Enable—Turns logging on (default=checked) or off (unchecked) for the currently displayed log
(either wrapping or non-wrapping). This is implemented on the switch if the trace filter is set to
no ports (TRACE_NO_PORTS).
• Include Class F Frames—When this default option is checked, all frames received are stored
in the log, unless port filtering is set to log only one port. When unchecked, no Class F frames
are logged.
• Only Port
• When this default option is unchecked, frames from all ports are logged. F frames depend
on the Include Class F Frame option.
• When this option is checked, the port entry field is enabled, and the port number to be
logged can be entered.
When in FICON Style mode-, you can enter port numbers in either hex or decimal by selecting
Hex/Decimal. The Spin button limits port number entries to valid ranges, and excludes
unavailable port numbers. After selecting OK from this port selection dialog, the selected port
number is displayed on the main log dialog next to the Only port check box (such as, Only
port 59, or Only port 59 (3B) if in FICON style mode). Only frames from or to the selected
port are retained in the switch’s log after that point.
NOTE: If not in FICON style mode, the Hex/Dialog option is not displayed and entries are only
made in decimal.