HP StorageWorks 2.32 Edge Switch - Manual (Page 197)

Edge Switch Element Manager user guide 197
This fabric log is no
longer valid because
the fabric has been
unpersisted.
The selected fabric log is no
longer available because the
fabric has been unpersisted.
To start a new log for the fabric, persist
the fabric through the Persist Fabric
dialog box.
This network address
has already been
assigned.
The specified IP address was
assigned and configured. A
unique address must be assigned.
Consult with the customer’s network
administrator to determine a new IP
address to be assigned and
configured.
This product is not
managed by this
management server.
The product selected is not
managed by this HAFM
appliance.
Select a product managed by this
HAFM appliance or go to the HAFM
appliance that manages the affected
product.
This switch is
currently part of this
fabric and cannot be
removed from the
Fabric Membership
List. Isolate the
switch from the fabric
prior to removing it
from the Fabric
Membership List.
You attempted to remove a switch
from the Fabric Membership List
using the Fabric Binding option,
but the switch is still part of the
fabric.
Remove the switch from the fabric by
setting the switch off line or blocking
the E_Port where the switch is
connected.
This World Wide Name
was not accepted. The
World Wide Name and
Domain ID must be
unique in the Fabric
Membership List.
You attempted to add a detached
switch to the Fabric Membership
List through the Fabric Binding
option (SANtegrity Binding
feature), but an entry already
exists in the Fabric Membership
List with the same WWN.
Enter a unique WWN for the switch in
the Add Detached Switch dialog box.
Too many members
defined.
The maximum number of zone
members that can be defined has
been reached.
Delete an existing zone member before
adding a new zone member.
Table 9 HAFM messages (continued)
Message Description Action