HP StorageWorks 2.32 Edge Switch - Manual (Page 85)

Edge Switch Element Manager user guide 85
Access the SANtegrity Authentication dialog box by clicking Configure > SANtegrity
Authentication. The Configure Security Authentication dialog box is displayed ( Figure 23 ).
Figure 23 Configure Security Authentication dialog box
To access the SANtegrity Authentication, one user must have the security administrator privilege. If
not, the Security tab is hidden. By default, the security administrator user group is displayed when
installing this feature.
The upper right part of the window shows the main working area, where the security administrator
configures the authentication security settings.
The lower left part of the window shows the regular master log and the lower right part of the
window shows the security log.
NOTE: The SANtegrity Authentication dialog box is only available to the security administrator so
the Security Log is only available to the security administrator.
Change the default size of the display by placing the cursor on the divider until a double arrow is
displayed. Click and drag the adjoining divider to resize the window. You can also show or hide an
area by clicking the left or right arrow on the divider.
On the tool bar the Display By option and the Search Box option are disabled.
Accessing SANtegrity Authentication tabs
There are five tabs in the Authentication section:
• Users—Allows the security administrator to set up users accessing the switch from CLI and web
interfaces to the switch. With the User tab, the Security Administrator specifies whether the Telnet
and HAFM Basic interfaces are enabled, what method the switch or director uses to authenticate
users, and which users are authorized to use these interfaces.